MN460 – Axial Large Ferrite Inductors

MN460 - Axial Large Ferrite Inductors

Category:

Description

Features

  • 10 µH @ 4 Amps to 1000 µH @ 0.80 Amp
  • High inductance in a small size.
  • Easy to use on a PCB.
  • Non standard values available.

Electrical Specifications

  • Inductance range from 3 µH to 100 mH.
  • Inductance tolerance is ± 15%.
  • Tolerances of ±10%, ±5%, ±3%, ±1% optional.
  • Ferrite high resistivity will allow high parallel-resistance and maximum coil performance.

Mechanical Specifications

  • Class B insulation.
  • Covered with polyolefin shrink tubing.
  • Leads 100% tinned, 20 AWG, 1.5 inch.
  • Packed in poly-bags.
  • Available on tape and reel.

 

Manutech Part Number Inductance
µH
@ 1 KHz		  DCR Ohms  Current (Amps)
MN460-10 10 0.016 4.0
MN460-12 12 0.018 4.0
MN460-15 15 0.020 4.0
MN460-18 18 0.022 4.0
MN460-22 22 0.024 4.0
MN460-27 27 0.025 4.0
MN460-33 33 0.028 4.0
MN460-39 39 0.031 4.0
MN460-47 47 0.034 4.0
MN460-56 56 0.043 3.2
MN460-68 68 0.059 2.5
MN460-82 82 0.066 2.0
MN460-100 100 0.084 1.6
MN460-120 120 0.113 1.6
MN460-150 150 0.129 1.6
MN460-180 180 0.150 1.6
MN460-220 220 0.162 1.6
MN460-270 270 0.226 1.6
MN460-330 330 0.257 1.6
MN460-390 390 0.288 1.6
MN460-470 470 0.393 1.2
MN460-560 560 0.504 1.0
MN460-680 680 0.570 1.0
MN460-820 820 0.643 0.8
MN460-1000 1000 0.844 0.8

 

All specifications are subject to change without notice • Can be customized to your specific application