test123


Category:
HIGH CURRENT CHOKES
TYPE 7140 10 μH-100 mH. 10% tolerance TYPE 7150 (EPOXY ENCAPSULATED VERSION)
Recommended Mounting Pitch – 1.50
NOTES(For both parts):
1. INDUCTANCE measured on QuadTech/GenRad 1659 RLC Digibridge at 1.0 KHz 6. Leads are bare tinned copper: -01 thru -10, #14 AWG; -11,
2. CURRENT RATING (Rated IDC) is based on 1.5 watt power  #15 AWG; -12 thru -49, #16 AWG.
dissipation for approximately 20°C temperature rise. 7. Marking – Printed with Caddell-Burns Part Number.
at up to twice the rated current. 8. Materials(see below):
3. INCREMENTAL CURRENT (INCR I) is the minimum current
Type 7140
at which the inductance will be decreased by 5% from its Coil Form: Ferrite
initial (zero-DC) value because of saturation. Magnet Wire: Per FED SPEC J-W-001177/9
4. DIELECTRIC WITHSTANDING VOLTAGE – 1000 VRMS
Jacket: Per MIL-I-23053/5, Class 1.
5. OPERATING TEMPERATURE RANGE: -55° to +105°C
  Type 7150
  Coil Form: Ferrite
  Magnet Wire: Per FED SPEC J-W-001177/9
  Cover and coating: Epoxy encapsulated
 

All specifications are subject to change without notice • Can be customized to your specific application