Description
MINIATURE HIGH CURRENT CHOKES INDUCTOR 1.2 uH.10%, 3200MA
$8.00 – $9.99
Dash # | 1-9 | 10-99 | 100-499 | 499-1000 | 1000 + |
Standard | |||||
1-40 | $8.00 | $6.39 | $4.81 | $4.00 | $3.20 |
41-49 | $9.09 | $7.26 | $5.45 | $4.54 | $3.63 |
RoHS Compliant | |||||
1-40 | $8.77 | $7.03 | $5.27 | $4.40 | $3.51 |
41-49 | $9.99 | $7.98 | $5.98 | $4.98 | $4.00 |
| MINIATURE HIGH CURRENT CHOKES | ||||
| TYPE 7120 10µH – 10mH 10% Tolerance | TYPE 7130 (CONFORMALLY COATED VERSION) | |||
| Recommended Mounting Pitch — 0.60″ | ||||
 |
||||
| Notes(For both types): |
||||
| 1. INDUCTANCE measured on QuadTech/GenRad 1659 RLC Digibridge at 1.0 KHz (value less than 10 μH are measured at 10 KHz). |
6. Materials: Coil Form: Ferrite Jacket: TYPE 7120 – Per MIL-I-23053/5, Class 1. Flame Retardant IAW UL 224, Class 1. TYPE 7130 – conformally coated with Polyurethane per MIL-I-46058 Magnet Wire: Per FED SPEC J-W-001177/9 |
|||
| 2. THE CURRENT RATING (Rated IDC) is based on 0.2 watt power dissipation (I2R) for an approximate 20°C temperature rise. Depending on the application, these units may be operated at higher currents. |
||||
| 3. INCREMENTAL CURRENT (INCR 1) is the minimum current at which the inductance will be decreased by 5% from its initial (zero-DC) value because of saturation. | 7. MARKING: TYPE 7120 – Printed with part number TYPE 7130 – Color coded per dash number using EIA color code |
|||
| 4. DIELECTRIC WITHSTANDING VOLTAGE: Type 7120–1000 VRMS Type 7130–100 VRMS |
||||
| 5. OPERATING TEMPERATURE RANGE: -55° to +105°C | ||||
STANDARD VALUES: Other values are available on special order
| Dash | Nominal | DCR ±20% | Min. SRF | Rated IDC | INCR I |
| No | Inductance | Ohms | MHz | Amps | Amps |
| -01 | 1.0 μH | .018 | 190 | 3300 | 3000 |
| -02 | 1.2 | .019 | 170 | 3200 | 2700 |
| -03 | 1.5 | .020 | 160 | 3100 | 2500 |
| -04 | 1.8 | .023 | 150 | 2900 | 2100 |
| -05 | 2.2 | .031 | 130 | 2600 | 2000 |
| -06 | 2.7 | .033 | 120 | 2500 | 1900 |
| -07 | 3.3 | .054 | 110 | 1900 | 1700 |
| -08 | 3.9 | .060 | 100 | 1800 | 1500 |
| -09 | 4.7 | .068 | 86 | 1700 | 1400 |
| -10 | 5.6 | .074 | 64 | 1600 | 1300 |
| -11 | 6.8 | .080 | 44 | 1600 | 1200 |
| -12 | 8.2 | .087 | 32 | 1500 | 1100 |
| -13 | 10 | .095 | 25 | 1500 | 970 |
| -14 | 12 | .11 | 17 | 1400 | 880 |
| -15 | 15 | .15 | 13 | 1200 | 790 |
| -16 | 18 | .16 | 10 | 1100 | 710 |
| -17 | 22 | .19 | 8.4 | 1000 | 640 |
| -18 | 27 | .22 | 8.0 | 950 | 580 |
| -19 | 33 | .24 | 7.6 | 910 | 530 |
| -20 | 39 | .26 | 7.1 | 880 | 480 |
| -21 | 47 | .35 | 6.0 | 760 | 430 |
| -22 | 56 | .47 | 5.8 | 650 | 400 |
| -23 | 68 | .53 | 4.3 | 610 | 370 |
| -24 | 82 | .60 | 4.1 | 580 | 330 |
| -25 | 100 | .67 | 3.9 | 550 | 300 |
| -26 |
120 μH | .90 | 3.6 | 470 | 270 |
| -27 |
150 | 1.2 | 3.2 | 410 | 250 |
| -28 |
180 | 1.4 | 2.8 | 380 | 220 |
| -29 |
220 | 1.9 | 2.3 | 320 | 200 |
| -30 |
270 | 2.1 | 2.1 | 310 | 180 |
| -31 |
330 | 2.4 | 1.9 | 290 | 170 |
| -32 |
390 | 3.0 | 1.7 | 260 | 150 |
| -33 |
470 | 3.4 | 1.4 | 240 | 140 |
| -34 |
560 | 4.7 | 1.3 | 210 | 130 |
| -35 |
680 | 6.4 | 1.2 | 180 | 110 |
| -36 |
820 | 7.1 | 1.1 | 170 | 100 |
| -37 |
1.0 mH | 7.9 | 1.0 | 160 | 95 |
| -38 |
1.2 | 9.0 | 94 | 150 | 87 |
| -39 |
1.5 | 12 | .76 | 130 | 78 |
| -40 |
1.8 | 14 | .72 | 120 | 71 |
| -41 |
2.2 | 19 | .64 | 100 | 64 |
| -42 |
2.7 | 25 | .56 | 90 | 58 |
| -43 |
3.3 | 29 | .53 | 83 | 52 |
| -44 |
3.9 | 34 | .48 | 77 | 48 |
| -45 |
4.7 | 37 | .45 | 74 | 44 |
| -46 |
5.6 | 50 | .40 | 63 | 40 |
| -47 |
6.8 | 58 | .36 | 59 | 36 |
| -48 |
8.2 | 68 | .29 | 54 | 33 |
| -49 |
10 | 75 | .27 | 52 | 30 |
 |
|||||