7200


$11.19$12.31

Dash #

1-9

10-99

100-499

499-1000

1000 +

Standard

1-37

$11.19

$8.96

$6.70
$5.60
$4.49

RoHS Compliant

1-37

$12.31

$9.86

$7.38
$6.15
$4.91
Choose an option
Choose an option
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
LEADED
LEADED
RoHS COMPLIANT
RoHS COMPLIANT
Clear
SKU: N/A Category:

Description

 

INDUCTOR 1.2 mH

Get product specifications

HIGH CURRENT CHOKES    
TYPE 7200 10µH – 10mH 10% Tolerance

Recommended Mounting Pitch — 1.25″

 
3-INCREMENTAL CURRENT (INCR I) is the approximate current at which the inductance will be decreased by 5% from its initial (zero-DC) value because of saturation. If the current is increased beyond INCR I, the inductance will continue to decrease as shown by the saturation curve below.
Notes:
  4. DIELECTRIC WITHSTANDING VOLTAGE – 1000 VRMS
   

5. OPERATING TEMPERATURE RANGE: -55° to +105°C.

1. INDUCTANCE measured on QuadTech/GenRad 1659 RLC Digibridge at 1.0 KHz   6. Marking – Printed with Caddell-Burns Part Number.

7. Materials:

Coil Form: Ferrite

Magnet Wire: Per FED SPEC J-W-001177/9

Jacket: Per MIL-I-23053/5, Class 1.

Flame Retardant IAW UL 224, Class 1.

 

 

2. THE CURRENT RATING (Rated IDC) is based on 0.5 watt power dissipation (I2R) for an approximate 20°C temperature rise. Depending on the application, these units may be operated at higher currents.

The core material for the 7200 series has been chosen for optimum current handling capability. Because this material has a relatively low volume resistivity, the core will appear as a shunt resistance on the order of 1 Kilohm, which may have to be taken into account when determining total power dissipation; e.g., if the induced voltage across the coil is 10 volts, there will be a V²/R loss on the order of 0.10 watt, in addition to the I²R losses associated with the winding.

STANDARD VALUES – Other values are available on special order

Dash Nominal DCR ±20% Min. SRF Rated IDC INCR I
No Inductance Ohms MHz Amps Amps
-01 10 µH 0.01 6 7.1 9.4
-02 12 0.012 4.8 6.5 8.3
-03 15 0.014 4 6 7.5
-04 18 0.015 3.3 5.8 7.1
-05 22 0.017 2.9 5.4 6.3
-06 27 0.018 2.5 5.3 5.8
-07 33 0.021 2.2 4.9 5.2
-08 39 0.023 2 4.7 4.7
-09 47 0.026 1.7 4.4 4.3
-10 56 0.03 1.5 4.1 3.8
-11 68 0.04 1.3 3.5 3.5
-12 82 0.053 1.2 3.1 3.2
-13 100 0.059 1.1 2.9 2.9
-14 120 0.068 1 2.7 2.6
-15 150 0.078 0.9 2.5 2.4
-16 180 0.089 0.82 2.4 2.2
-17 220 0.12 0.74 2 1.9
-18 270 0.16 0.68 1.8 1.8
-19 330 0.18 0.61 1.7 1.6
-20 390 µH 0.2 0.56 1.6 1.5
-21 470 0.26 0.51 1.4 1.3
-22 560 0.29 0.47 1.3 1.2
-23 680 0.39 0.43 1.1 1.1
-24 820 0.44 0.39 1.1 1
-25 1.0 mH 0.59 0.36 0.92 0.92
-26
1.2 0.66 0.33 0.87 0.84
-27
1.5 0.77 0.31 0.81 0.75
-28
1.8 0.87 0.29 0.76 0.68
-29
2.2 1.2 0.27 0.65 0.62
-30
2.7 1.6 0.25 0.56 0.56
-31
3.3 1.8 0.23 0.53 0.51
-32
3.9 2 0.22 0.5 0.47
-33
4.7 2.6 0.2 0.44 0.42
-34
5.6 2.9 0.19 0.42 0.39
-35
6.8 3.4 0.18 0.38 0.35
-36
8.2 4.4 0.17 0.34 0.32
-37
10 6 0.16 0.29 0.29
 

 

 

All specifications are subject to change without notice • Can be customized to your specific application